A Beginner's Guide to Vaping

Electronic cigarettes control the output and working status of smoke through high-tech silicon chips and airflow sensors. The nicotine is aerosolized, and a solution containing nicotine and flavor is atomized into particles that are absorbed through the lungs while exhaling simulated smoke. When many people use it for the first time, the performance of the electronic cigarette device may be reduced due to improper operation. The following is a beginner's guide to e-cigarettes.
Steps for usage
(1) Take out the atomizer and assemble it with the main unit to ensure that the overall structure of the atomizer is not loose.
(2) Turn the bottom steel ring to close the air inlet of the atomizer, open the top cover of the atomizer, and pour the e-liquid into both sides of the glass cavity of the atomizer. About 80% by volume. Inject into the round hole of the atomizing core in the middle of the atomizer.
(3) Close the top cover, open the air inlet, let it stand for 5 minutes, and wait for the iron core to be fully wetted.
(4) Press the ignition button (big button) five times to turn it on, and adjust the required power of the atomizer resistor (marked on the atomizing core) to watts (W) to start normal use. Ignition in oil will burn the core.
Calculation of electricity consumption
The power obtained from the finished atomizer is 60%~70%
The power obtained by DIY atomizer is 70%~80%
The greater the power, the greater the smoke and the greater the iron loss. The lower the power, the better the taste and the lower the iron loss.
other considerations
(1) The atomizer may leak oil when refueling for the first time, just wipe it off with a paper towel; if the oil leakage continues, please check whether the atomizer is tightened or contact customer service for consultation.
(2) If the e-liquid is lower than the oil inlet (the white round hole on the atomizer), be sure to refuel in time, otherwise it is easy to burn the core; if it is not used for a long time, it can be kept at this position. Do not store excess e-liquid in this location. inside the fuel tank.
(3) The atomizing core should be replaced every 7 to 14 days, otherwise it will produce a pasty smell and reduce the use experience. If necessary, please contact customer service to purchase.
(4) It is recommended to use the 1A charging head and the attached data cable to charge the host. The specific charging time can be according to the instruction manual of the electronic cigarette. Do not overcharge for safety. It should be noted that the insufficient power of the USB port of the computer will cause the charging to be much slower.
(5) The choice of e-liquid can be alternately added to the oil tank according to your own taste, so you don't have to worry too much about the smell.
When buying e-cigarettes, we also need to consider their quality and service life to prevent buying inferior e-cigarette products. If you still have questions about the use of electronic cigarettes after reviewing the above content, you can contact us for professional solutions.
As a professional manufacturer of electronic cigarette products, we have accumulated rich design and production experience in this field. We have a professional production team and a strict quality inspection system, and strictly control the quality of every link from product design to export. At the same time, we can also provide corresponding customized services and effective solutions according to customer needs. If you are interested in our electronic cigarettes, please contact us now!