How to dismantle disposable electronic cigarettes?

: Many friends who first touch e-cigarettes prefer to choose disposable e-cigarettes, one is because it is cheap, and the second is if you can accept this way of absorbing nicotine, of course you can also find reusable products, because the products are too convenient and long-term use

Many friends who first touch e-cigarettes prefer to choose disposable e-cigarettes, one is because it is cheap, and the other is if you can accept this way of absorbing nicotine, of course you can also find reusable products, because the products are too convenient and long-term use . So how to dismantle disposable electronic cigarettes? Today, the Electronic Cigarette Information Bureau will answer for you. How to dismantle disposable electronic cigarettes? Opening a disposable electronic cigarette today may not be representative, but the structure of pod vapes is roughly the same, so it is good for everyone to understand. Disassembly tools: pointed tweezers, needle-nose pliers, etc.;
Method: Violent disassembly, because the bottom cover and the inner wall of the fuselage are fixed by super glue; after prying open, you can take out the bottom cover, the connected battery, oil storage tank, circuit wires, etc. together.
We can see that the battery is a very common lithium battery with a capacity of 240mAh. Generally speaking, the battery capacity of disposable e-cigarettes will not be too large, because of the volume limit, and secondly, the battery capacity can ensure the safety very well, and it will not cause an explosion due to a short circuit, even if it is short-circuited in a fully charged state. , and at most it is due to the deformation of the shell or bottom cover due to heat, and no burning phenomenon will occur. It needs to be mentioned here that the casing of disposable electronic cigarettes is usually designed with heat-proof design and equipped with a pressure relief valve.
The capacity of the oil tank is not marked, the official data is that it can pump about 350 puffs, the total capacity is more than 2ml by visual inspection, the design of the atomization tank and the oil tank is integrated, the air channel is designed to be very long, it should be for the purpose of condensate and control smoke temperature. After the battery is completely used up, we can see that there is still about 1/3 of the oil left in it. The purpose is to prevent the battery from running out of oil, which will greatly affect the customer experience and smell like burnt cotton. The circuit connection line is very thin, which is enough to prove that the output power will not be too large. Generally, the output power of disposable electronic cigarettes is about 5-12W.
The last is the integrated microphone, its functions include air intake switch, working indicator light, etc. The working principle during the pumping process is roughly as follows: the negative pole of the atomizer is connected to the microphone, and the positive pole is divided into two circuit lines ①The positive pole of the atomizer is connected to the negative pole of the battery and then to the microphone ②The positive pole of the battery is directly connected to the microphone. That is to say, this microphone is the whole pod“CPU”
It has a cotton layer design on the bottom cover, the purpose is to prevent the condensate from running around and affecting the function of the microphone. There is also a cotton layer design on the top of the shell to prevent the taste of condensate entering the mouth during the suction process. All in all, this product of disposable vaping confirms an idiom: the sparrow is small and full. If you are using or planning to use this disposable vaping cigarette product, this gadget recommends that you use it to dispose of it properly, like using a disposable battery such as Nuff, and put the item in the confidential trash.