With e-cigarettes becoming more and more popular now, there is something to happen wherever you go. If you accidentally put your e-cigarette in water while vaping, don't worry about the methods that might bring your e-cigarette back to life.

First of all, if your e-cigarette accidentally enters or falls into water, please take it out immediately and minimize the water content of the cigarette rod, because the liquid on the circuit board can lead to conduction. Objects are connected to each other, causing a short circuit, and thus a short circuit occurs, and the short circuit will directly burn the entire circuit.

1. Separate the pod from the fuselage first.

Of course, once our electronic cigarettes are in the water, they are of course salvaged immediately. Immediately separate the e-cigarette from the plume. Stop bringing the electrodes into contact with each other again.

2. Dry the e-cigarette stick.

Once you've completed the first step, learn how to get moisture out of your e-cigarette stick right away. If there is a hair dryer at home, you can use the hair dryer to dry the moisture in the tobacco rod, but pay attention: you must use cold air, remember not to use hot air. The circuit board may be shattered by the hot air. If you don't have a hair dryer, you can try using paper towels and a hand crank to dry the pipes. Once removed, let the rod sit for a few minutes. After the rod is completely dry, proceed to the next step.

 3. Check whether the cigarette rod is effective.

After completing the above steps, the next step is to check whether the cigarette rod is broken. After confirming that the cigarette rod is completely dry, place the pod on the cigarette rod. Note the change in the indicator light. Generally, the cigarette rod indicator light of the cigarette changer is white. If you put a cigarette bomb, it will turn red. This is where the problem lies. Then try pumping again. If it's a white bulb and it's pumping, there's no problem. If it is a red light bulb and cannot smoke, it means that the circuit board in the cigarette rod may be short-circuited due to water ingress. If the cigarette rod is indeed damaged by water, and the above methods cannot be dealt with, then go to the after-sales service.