The Complete Guide to Properly Caring for E-Cigarettes
The maintenance of electronic cigarettes during use is a big problem. Good usage habits can prolong the service life of electronic cigarettes and save costs for yourself. By knowing the following complete guide to properly maintaining your e-cigarette, you can reduce the chances of doing it wrong.
Wipe the battery contacts and battery positive and negative poles inside the main unit regularly
Although most of the battery contacts inside the main unit are gold-plated or silver-plated, oxidation is still inevitable. Wipe the battery contacts regularly, clean the positive and negative electrode carbons of the battery, ensure the normal current output of the battery, and ensure that the host maintains the best output state at any time.
The main electrode needs to be cleaned frequently, pay attention to maintenance. In fact, the electrode interface part is the part with the most problems of the host. Cleaning the oxide on the electrode part during daily use can ensure a smooth connection between the host and the atomizer.
At the same time, if the main unit is not used for a long time, it is recommended to remove the atomizer. Especially the oil drop atomizer with long positive screws must be removed in time to reduce the pressure of the atomizer on the host electrode. Replace the battery in the main unit in time, don't wait for the display of weak power to replace it. It seems that every user knows how to replace the battery in time, but this is not the case. Due to the sufficient series voltage of dual-battery devices, the frequency of battery replacement will be relatively slow. But for a single-battery host, continuous high-power output will quickly consume battery power. A single battery after power consumption cannot reach the high power output capacity set by the device, which directly affects the user experience.
Pay attention to clean up the condensed water near the host interface or the condensate accumulation or leakage will inevitably occur during the use of the e-liquid atomizer. Even if these liquids are handled, damage to the host can be effectively avoided. If left untreated, the condensed water will corrode metal parts such as the screws on the top of the console. Even for some hosts without electrode leakage protection, liquid may flow into the host and cause greater damage to the host. It is recommended to remove the cartridge when not in use, store the stick and cartridge separately, do not assemble. And check whether there is condensation in the contact area of the pod, and wipe it clean in time. Place e-cigarettes correctly
Electronic cigarettes should be placed according to the principle. When there is e-liquid in the atomizer, the mouthpiece should be placed upwards, and when there is no electronic cigarette, it should be relatively free. However, it is best not to stand the electronic cigarette upside down, so as to prevent the remaining e-liquid in the atomizer from flowing out.
Pay attention to the frequent maintenance of lithium-ion batteries The maintenance of lithium-ion batteries is more important, because the electronic cigarette battery is the main component, and the lithium-ion batteries should be charged after the power is exhausted as much as possible.
Fully charge once, do not cut off the power halfway, take out the lithium-ion battery within half an hour after fully charging, and turn off the power of the electronic cigarette when it is not used for a long time. The single-puff smoking time should not be too long, so as not to overheat the lithium-ion battery and affect the life of the lithium-ion battery.
Prevent the atomizer from burning smell The core of the atomizer is the atomizing core, which is composed of a resistor, oil guide rope and some accessories. The most common problem with atomizers is burnt smell from the atomizer. The reason is that the resistance heating burned the oil guide rope. Therefore, during use, pay attention to the remaining amount of e-liquid and do not dry it.
The voltage regulating machine room should adjust the voltage appropriately, and do not pursue high voltage. If you want to pursue big smoke, you must pay attention to smoke oil. Generally, when the e-liquid is more than 2/3, it is not easy to produce burnt smell with a voltage of 5-6V. As the e-juice decreases, the voltage should slowly decrease. Handle oil spills correctly
Regarding the treatment of some oil leakage and oil fume, the traditional atomizer generally has an air guide hole at the bottom to guide the air. But after a long time, there will be a little smoke oil (but it will not leak into the fuselage, and you can't feel it outside).
It is recommended to separate the lithium-ion battery from the atomizer every time you add e-liquid, and wipe it with a paper towel. Because usually add e-liquid once a day and wipe it once a day.
There is oil where the cigarette holder meets the mouth. The reason may be that oil was mistakenly added to the cigarette outlet. Just wipe with a paper towel; the smoke has oil, but the mouthpiece doesn't. The reason is that there is oil in the exhaust port. The treatment method is to remove the atomizing core, wipe it into a slender strip with a paper towel, and insert it into the smoke outlet to absorb the smoke oil.
If you want to know more about the maintenance of electronic cigarettes after reading the above content, please contact JOECIG for a comprehensive solution.
With excellent R&D technology and high-quality products, we have become one of the leading electronic cigarette manufacturers. We put the actual needs of our customers first. Professional production team and strict quality inspection system, all-round control of product quality. At the same time, we can improve thoughtful one-stop service and effective solution technology. If you want to buy our disposable electronic cigarettes, please contact us now!