How to clean your vape pod system?

by:Runfree     2023-03-23
2022/4/27Switching from an electronic cigarette system to an all-in-one pod kit has many advantages. On the one hand, it lets us enjoy high-potency nicotine salts, which make us feel more like we're smoking. Also, pod kits are very durable compared to box mod setups, which meant we could easily carry our vaping system in our pockets during the day.
Another benefit of using a vape pod system is that it is relatively easier to maintain than other types of e-cigarettes. Since there are fewer parts, and the pod kit is smaller than the box module kit, less cleaning is required to keep it in good working order.
However, that doesn't mean pod systems don't require the regular maintenance that regular vaping systems do. As you know, there are hundreds of different styles of pod systems on the market today, some of which require more maintenance. Proper maintenance can make your pod system last longer, here are the detailed steps for cleaning.
Step 1: Take apart your pod system. Most open pod systems consist of two components: the pod box and the pod module. If your kit has more individual parts, separate them.
We want to start by cleaning up the connection. The point where your pod mod connects to your pod cartridge must be cleaned regularly, as a dirty connection can interfere with your mod's ability to power the coil. In other words, a dirty connection can actually interfere with your system's ability to vaporize e-liquid.
Step 2: Take a cotton swab and dip it in some rubbing alcohol. Then, gently but thoroughly wipe the connections on the battery and cartridge.
Step 3: Next, use a cotton swab to clean the connection that connects the mod to the charging device. Dirty connections can interfere with the battery's ability to charge properly.
Now let's clean the chassis of your pod mod. Fragmentation can lead to buttons eventually getting stuck, which means the end of your pod system.
Step 4: If your pod mod has buttons, check to make sure there is no debris around those buttons. If not, try carefully removing debris with a toothpick or other very small sharp object.
Step 5: Once you're done with the buttons, you can give the pod system a quick wipe down with a microfiber cloth dampened with a little water or rubbing alcohol.
After cleaning the mod itself, you can move onto the pod box.
Step 6: Start by emptying your pod cartridge. Pour off as much juice as possible.
Step 7: Add warm water, shake quickly, and pour out. This will remove any debris left over from the last e-liquid.
STEP 8: If your pod system has a separate suction nozzle or drip-tip, remove it and run warm water over it. Now, look inside. If you can see crumbs or juice goo, carefully remove the contents with a cotton swab or toothpick.
Now you can put your open pod system back together and enjoy using it again. We recommend performing this step-by-step process on a weekly basis to ensure your system is always in a good, clean state.
After completing the above steps, your pod system should be completely clean. The pod system itself is clean, including all buttons, the connections will be clear of juice and grime residue, and the mouthpiece should be free of any buildup.
All vaping devices require regular cleaning maintenance, and there's no way around that. If you want your kit to continue to please you, practice safe vaping habits and clean it out regularly. Use this guide to properly clean your pod mod system so you can continue to get the most out of it.
Please contact us if you plan to purchase or replace your pod system.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: